Rental Unit Inventory
Our inventory of on-demand rental units includes Hydraulic Power Units (HPUs), Flushing Units, Coolers, and more.

Hydraulic Power Units
Click to view inventory!

Flushing Units
Click to view inventory!

Cooling Units
Click to view inventory!
Hydraulic Power Units Rental Inventory
Delta Hydraulics rents Hydraulic Power Units (HPUs) customized to meet our clients' specific needs. Our clients are provided with Delta’s expertise in customizing an HPU that will meet the hydraulic power needs for your special projects. We have a variety of rental options for furnishing power for a special project, powering a construction project, testing newly engineered products, or providing an emergency power source. Delta also designs and furnishes the engineering for the implementation of our hydraulic power units on your site.
We custom-build in-house a selection of Hydraulic Powers Units to provide an assortment of engineering adaptations and accessories available to meet your HPU needs including:
- Diesel or electric powered units
- Stainless steel water glycol units
- Various types of pumps: fixed displacement or compensating
- Directional control valves
- Self-contained skin mount frame with forklift capability and certified 4-point lifting harness
- Assorted footprints are available
- Water or air heat exchangers
- On-site set up and training
HPU Setup and Training
Delta Hydraulics is proud to provide onsite installation of hydraulic power units by our experienced, specialized technicians familiar with hydraulic system functions and requirements. Our technicians also provide onsite training for hydraulic system startup and maintenance as well as safety training and awareness for hydraulic unit use. Technicians provide hose connections from the unit to job components and systems as well as set flows and pressures. Fittings and hose connections including flame retardant hydraulic hose and ABS certified hose for offshore industry are available for connecting the HPU to tooling and components. Technicians can also make onsite electrical connections of HPUs.
HYDRAULIC POWER UNIT 440E ELECTRIC POWER UNIT
* On-site Installation & Setup Available
Specifications
-
Electric Power Unit
Equipped with 440 Electric Motor, 60 HZ, 31 Amps
Across the line electrical motor starter
20" SO cord
Kidney loop pump @4.8 GPM -
Hydraulic System
32 GPM Fixed Displacement Pump or Compensating pump @2000 to 3000 psi
Hydraulic Tank: 75 gals
Air-blast heat exchanger
Built in pressure relief valve
Pressure filter -
Connection sizes: Pressure #12 male JIC, Return #16 male JIC, Case #2 male JIC
Self containment skid with fork lift and crane lift capability
Dimensions: 30" W x 59 1/2" L x 59"H
Weight: 1200 lbs
HYDRAULIC POWER UNIT 380E ELECTRIC POWER UNIT
* On-site Installation & Setup Available
Specifications
- Electrical System
20 HP Electric Motor 480 VOLT, 25 AMPS
10 GPM fixed displacement pump @2800 PSI
Pressure relief valve (adjustable) - Unit
Self containment pan with forklift and crane lift capability
Dimensions: 44" W x 49" L x 85" H
Weight: 700 lbs
HYDRAULIC POWER UNIT 3500D DIESEL POWER UNIT
* On-site Installation & Setup Available
Specifications
- Diesel Power
Engine: Deutz 175HP
Type of Pump: Kawasaki pump
Operating Pressure 3000 PSI @ 60 GPM - Hydraulic System
Capacity of Built-in Fuel Tanks in Gallons: 55 GALS
Operating Pressure & Flow Rate: 3000 psi/60 GPM
Hydraulic Tank: 140 GALS
In tank Donaldson return filter
High pressure filter - Unit
Mounting Details: Unit can be welded to deck of vessels
Hydraulic connections: Pressure #16 male JIC, Return #20 male JIC, Case Drain #12 male JIC
Dimensions: 49" w x 128" L x 94" H
Weight: 6500 lbs
HYDRAULIC POWER UNIT 2570D DIESEL POWER UNIT
* On-site Installation & Setup Available
Specifications
-
Diesel Power
Engine: Deutz 78HP Diesel
Rexroth Compensating Pump
Operating Pressure & flow rate: 2500 PSI @ 40 GPM
Built in pressure relief valve -
Hydraulic System
Hydraulic Tank 140 gallons
Capacity of Built-in Fuel Tanks in Gallons: 18 GALS
Donaldson Return filter
Safety low level switch
Oil cooler hydraulic driven
Kidney Loop
Temperature gauge -
Skid
Hydraulic connections: Pressure #16 female JIC, Return #20 female JIC, Case drain #12 Female
Self contained skid with fork lift and crane life capability
Dimensions: 48" W x 108" L x 96" H
Weight: 4300 lbs
HYDRAULIC POWER UNIT 1001D DIESEL POWER UNIT
* On-site Installation & Setup Available
Specifications
-
Diesel Power
Equipped with Deutz 45 HP Diesel Engine
10 GPM Compensating Pump @ 3000 psi or
20 GPM Compensating Pump @ 2000 psi or
20 GPM Fixed Displacement Pump @ 2500 psi -
Hydraulic System
Hydraulic Tank: 140 Gallons
Standard load sensor controls
Built in volume Stop -
Unit
Connections: Pressure #16 male JIC, Return #20 male JIC, Case #12 male JIC
Self containment skid with fork lift or crane lift capability
Dimensions: 45”W x 79”L x 84”H
Weight: 2700 lbs -
Skid
Hydraulic connections: Pressure #16 female JIC, Return #20 female JIC, Case drain #12 Female
Self contained skid with fork lift and crane life capability
Dimensions: 48" W x 108" L x 96" H
Weight: 4300 lbs
DH-HPU 4000E ELECTRIC POWER UNIT
* On-site Installation & Setup Available
Specifications
-
Electric Power
Motor 100 HP, 480 volts, 114 amps @ 60 HZ
Across the line electric starter -
Hydraulic System
Compensating pump, (45 GPM @3000 PSI) with load sensing or fixed displacement
Built in safety relief valve
Hydraulic tank volume: 175 gallons
Built in pressure relief valve
Electric hydraulic cooler
Low oil level protection switch
100 micron in tank suction strainer
Donaldson tank return filter -
Unit
Connection sizes: Pressure #16 male JIC, Return #20 male JIC, case drain #12 male JIC
Self contained skid with forklift and crane lifting capability
Dimensions: 47” W X 71” L X 107” H
Weight 3800 LBS.
DH-HPU-7001E ELECTRIC POWER UNIT
* On-site Installation & Setup Available
Specifications
-
Electric Power
Two 400 HP electric motor with 460-480 volts, HZ 60, AMPS 435
Four Kawasaki K3VL 200 compensating pumps 300 GPMS @ 3000 PSI
Two Soft start controls -
Hydraulic System
1 hydraulic reservoir-1000 gallons
Air cooled heat exchanger
2 built in safety relief valves
2 hydraulic compensating pumps with load sensing
2 hydraulic pressure filters-Donaldson -
Unit
Self contained skid mount with forklift & crane lift capability
Dimension: 96” wide X 120” long X 96” high
Weight: 19,500 LBS
DH-HPU-6005E ELECTRIC POWER UNIT
* On-site Installation & Setup Available
Specifications
- Electric Power
Electric motor, 7.5 HP, 480 volts, 9 amps @60HZ
Fixed displacement pump, 5 GPM@140 PSI
Cross line electric starter with 20’ SO cord power cable - Hydraulic System
Hydraulic reservoir-stainless steel, 40 gallon with site glass and temperature gauge
Return filter
Pressure filter
External filter housing added to machine
Safety reliefs
Flow Controller - Self containment skid with Fork lift & crane lift capability
Dimensions: 24" W x 45" L x 46" H
Weight: 325 lbs
DH-HPU-612E ELECTRIC POWER UNIT
* On-site Installation & Setup Available
Specifications
- Electric Power
Electric motor - 20 HP@480 volts, 19 amps, 60 HZ
Fixed displacement pump-13 GPM @ 2000 PSI
Electrical starter control panel with 20' SO cord - Hydraulic System
75 gallon stainless steel tank
Built in pressure relief valve
Low oil level protection switch - Forklift and crane lift capability
Self Contained pan with forklift capability
Bulk head connections: Pressure-#12 male JIC, return-#16 male JIC, case #12 male JIC
Dimensions: 32" W x 49" L x 61" H
Weight: 600 lbs
DH-HPU-4500D DIESEL POWER UNIT
* On-site Installation & Setup Available
Specifications
- Diesel Power
Detroit engine: 8V71
Kidney loop for cool
Kawasaki compensating piston pump
3000 PSI @80 GPM - Hydraulic System
Hydraulic tank capacity: 400 gallons
Fuel tank: 140 gallons
Air blast heat ex changer
Hydraulic pressure relief valve
Donaldson Pressure Filter with check valve
In-Tank Donaldson mounted return filter - Self Contained skid with forklift capability & crane lift capability
Connections: Pressure #16 male JIC, return line #20 male JIC, case drain #12 male JIC
Dimensions: 96" W X 120" L x 96" H
Weight: 12,000 lbs
DH-HPU-5000E ELECTRIC POWER UNIT
* On-site Installation & Setup Available
Specifications
- Electric Power Unit
Quantity 2 electric motors - 150 HP
480 bolts, 60 HZ, 170 AMP per motor, 3 phase
Quantity 2 soft start electrical starters
2 main power cables 60' each - Hydraulic System
Quantity 2 compensating pumps-70 GPM @3000 PSI
Quantity 2 compensating pumps-12 GPM @3000 PSI
Main pump safety reliefs, maximum pressure 5000 PSI SET AT 3000 PSI
Quantity 2 main pump pressure filters
Hydraulic reservoir-400 gallons
In tank return filter
Tube and shell oil cooler for sea water
Low level oil switch - Self Contained Skid with Crane lift and Fork-lifting capability
Header pressure line #24 quick disconnect, return line #24 quick disconnect, case drain #12 and pilot line #12
Dimension: 84” WIDE X 84” TALL X 121” LONG
Weight: 13,000 pounds
DH-HPU-445E ELECTRIC POWER UNIT
* On-site Installation & Setup Available
Specifications
- Electric Power Unit
Electric Motor-100 HP, 480 volts, 114 amps, 60 HZ
20' "SO" electric cord
Soft start electric motor
Pump: Kawasaki (K3VL112) pressure compensating piston pump-25 GPMs @3000 PSI
Hydraulic pump is equipped with a volume adjustment
Built in safety relief valves - Hydraulic System
Hydraulic tank: 125 gallons with 10 micron return filters
Kidney loop with air blast heat exchanger
Donaldson Pressure filter
Donaldson Main return filter
Donaldson Kidney loop filter - Unit
Self contained skid with Forklift & crane lift capability
#1 Bulkhead fittings: return #20 male JIC - pressure #16 male JIC - case drain #12 male JIC
Measurements: 53” W x 88” L X 89” H
Weight 4,800 LBS
DH-HPU-6001E ELECTRIC POWER UNIT
* On-site Installation & Setup Available
Specifications
- Electric Power Unit
Electric Motor-Equipped with Marathon 200 HP electric motor @480 volts, Amps-250, 60 HZ,
VFD Controller
Rexroth 100 GPM Compensating Pump @ 3,000 PSI,
Volume adjustment to increase or decrease GPM.
Soft start electrical starter
Sun Hydraulic adjustable pressure relief valve - Hydraulic System
500-gallon hydraulic tank with low level shutdown switch
Hydraulic reservoir air breather 1"
Hydraulic driven air blast heat exchangers with tank
2 Donaldson in tank kidney loop return filter
2 Donaldson pressure filter
2 Donaldson return filters
Outlet check valve on pressure line 1 1/4 - Controls
Self contained skid with Fork lift and crane lift capability
Bulk Head Connections-Pressure Port male JIC #24, return port male JIC #32, case drain port male #12 JIC
Dimensions 96” W x 116” L x 108” H
Weight-18,500 lbs
DH-HPU-7002E ELECTRIC POWER UNIT
* On-site Installation & Setup Available
Specifications
- Electric Power
400 HP electric motor
Soft start controller - Hydraulic System
Two Kawasaki K3VL 200 compensating pumps-132 GPMs @3000 PSI
Two pressure filters
Two Safety reliefs - Unit
Skid mounted containment pan with forklift & crane lift capability
Bulkhead connections: 2 pressure #24 male JIC, 2 returns #32 male JIC,
case drain #12 Male JIC
Weight: 4500 pounds
DH-HPU-825E ELECTRIC POWER UNIT/FLUSHING
* On-site Installation & Setup Available
Specifications
- Electric Motor
75Hp, 480 volts, 81 amps, 60 HZ with 30' SO cord
VFD Electrical drive controller
K3VL80 Kawasaki Piston compensated pump with remote pressure
control (PO pump regulator) 20 GPM @4000 PSI - Return filter for 150 GPM capability
Safety pressure relief valve
Panel with pressure gauge - Self contained skid with fork lift & crane lift capability
Dimensions: 72" W x 67" L X 100" H
Weight: 4800 lbs
Flushing Units Rental Inventory
Delta Hydraulics rents Hydraulic Power Units (HPUs) customized to meet our clients' specific needs. Our clients are provided with Delta’s expertise in customizing an HPU that will meet the hydraulic power needs for your special projects. We have a variety of rental options for furnishing power for a special project, powering a construction project, testing newly engineered products, or providing an emergency power source. Delta also designs and furnishes the engineering for the implementation of our hydraulic power units on your site.
We custom-build in-house a selection of Hydraulic Powers Units to provide an assortment of engineering adaptations and accessories available to meet your HPU needs including:
- Diesel or electric powered units
- Stainless steel water glycol units
- Various types of pumps: fixed displacement or compensating
- Directional control valves
- Self-contained skin mount frame with forklift capability and certified 4-point lifting harness
- Assorted footprints are available
- Water or air heat exchangers
- On-site set up and training
HPU Setup and Training
Delta Hydraulics is proud to provide onsite installation of hydraulic power units by our experienced, specialized technicians familiar with hydraulic system functions and requirements. Our technicians also provide onsite training for hydraulic system startup and maintenance as well as safety training and awareness for hydraulic unit use. Technicians provide hose connections from the unit to job components and systems as well as set flows and pressures. Fittings and hose connections including flame retardant hydraulic hose and ABS certified hose for offshore industry are available for connecting the HPU to tooling and components. Technicians can also make onsite electrical connections of HPUs.
DH-FIL-122 ELECTRICAL FILTRATION UNIT
* On-site Installation & Setup Available
Specifications
-
Filtration unit-electrical 110 volts
Filters two 27” filters 5 micron
Fittings for particle counter installed
Flow rate-10GPM
Maximum pressure 200 PSI
DH-FIL 611 FILTER UNIT
* On-site Installation & Setup Available
Specifications
-
Filtration Unit
Tuthill internal gear circulation pump, 80 GPM @200 PSI max
Pall filter housing, 2 canisters with 6 filters in each canister, quick change valve between each canister
Visual dirty or clogged filter indicators
225 PSI max pressure, 35 PSID max differential
480 volts 25 amps
20’ so cord -
Controls
Self containment skid
Fork lift and crane lift capability -
Unit
Dimensions: 10’ l x 4’ w x 7’ 4” high
Weight: 2,200 lbs
DH-FIL-613E FILTER UNIT
* On-site Installation & Setup Available
Specifications
-
Filtration Unit
Electric motor-25 hp, 480 volts, 60 hz, 29 amps
Fixed displacement pump -
Controls
Flow controler
Safety relief
Flow meter
Schroder filter housing (double) -
Unit
Weight-840 lbs
DH-FIL-610 FILTER UNIT
* On-site Installation & Setup Available
Specifications
-
Filtration Unit
2 pall stand alone canisters-model hc8900fkn397
Type hz3142jo4knxwpt
Flow rate-400 gpm
Mapwp-260 psi@200 *f
Filter elements-qty 6 cartridges
200 gpm @250 psi @5 microns
Connection-#24 mjic -
Controls
Self contained skid with forklift and crane lift capability
Dimensions-48” w x 48” l x 85” h
Weight-500 lbs
DH-FIL-510
* On-site Installation & Setup Available
Specifications
-
Filtration Unit
Duplex fuel / oil filter assembly
Weight: 380 lbs
Dimensions: 36’’W, 60’’L, 60’’ T
Flow rate up to 100 GPM
Pressure and differential gauge
One cartridge per housing # OFS-840X-3B
DH-FIL-TUTHILL
* On-site Installation & Setup Available
Specifications
-
Filtration Unit
Pump Manufacture: Tuthill PN/ 6C2BV-C-7
Pump Flow And Pressure Specs: 80 GPM @ 250 PSI Max
Pump Is Equipped With Pressure Relief Valve
20’ Electric So Cord
Electrical Requirements: 480 Volts, 19 Amps -
Unit Is Equipped With Starter Enclosure Assembly To
Include Start, Stop, E-Stop, And Disconnect
Electrical Ratings ARA Non EX
Pump Connections: 2’’ Suction With Cam-lock Connection & 1 ½” Supply JIC Connection
Unit Dimensions: 51’’ W X 51’’ L X 78’’ H
DH-FIL-825E FLUSHING UNIT PUMP/HPU
* On-site Installation & Setup Available
Specifications
-
Flushing Unit/HPU Unit
VFD Drive Controller
Rotary Potentiometer for motor speed adjustment
VFD Assembly is equipped with by pass
40' Electrical SO cord
Panel Gauge with Pressure Gauges -
Pressure Filters are available depending on application
75 HP Electric Motor, 3600 RPM, 60 HZ, 480 Volts
Centrifugal or Positive Displacement Pump Available
Built in Pressure Relief Valve
Fork Lift and Crane Lift Capability
Self-Contained Skid
Dimensions: 72" W x 67" L x 100" H
Weight: 5400 lbs
Cooling Units Rental Inventory
Delta Hydraulics rents Hydraulic Power Units (HPUs) customized to meet our clients' specific needs. Our clients are provided with Delta’s expertise in customizing an HPU that will meet the hydraulic power needs for your special projects. We have a variety of rental options for furnishing power for a special project, powering a construction project, testing newly engineered products, or providing an emergency power source. Delta also designs and furnishes the engineering for the implementation of our hydraulic power units on your site.
We custom-build in-house a selection of Hydraulic Powers Units to provide an assortment of engineering adaptations and accessories available to meet your HPU needs including:
- Diesel or electric powered units
- Stainless steel water glycol units
- Various types of pumps: fixed displacement or compensating
- Directional control valves
- Self-contained skin mount frame with forklift capability and certified 4-point lifting harness
- Assorted footprints are available
- Water or air heat exchangers
- On-site set up and training
HPU Setup and Training
Delta Hydraulics is proud to provide onsite installation of hydraulic power units by our experienced, specialized technicians familiar with hydraulic system functions and requirements. Our technicians also provide onsite training for hydraulic system startup and maintenance as well as safety training and awareness for hydraulic unit use. Technicians provide hose connections from the unit to job components and systems as well as set flows and pressures. Fittings and hose connections including flame retardant hydraulic hose and ABS certified hose for offshore industry are available for connecting the HPU to tooling and components. Technicians can also make onsite electrical connections of HPUs.
DH-ACC-3000
* On-site Installation & Setup Available
Specifications
-
Skid Measurements 49’’ L, 48’’ W, 104’’ H
Qty 4, 3,000 Psi Accumulators
Skid Weight 2,100 Lbs
Bladder Style
Main Connection 1’’ Jic Male
Self Contained Skid, Forlift And Crane Lift
Capability
DH-AIR-311 COOLER
* On-site Installation & Setup Available
Specifications
-
Air Blast Heat Exchanger
Skid Dimintions: 70’’ W X 74’’ L X 61’’ H
Unit Weight: 2,100 Lbs
Cooler Manufacture: Honeywell Pn/ 727552-0001
Unit Volts: 480 Volt, 6. 2 Amps, 60 Hz
Unit Conection Type 2’’ Npt
Unit Is Equiped With Elctrical Starter Assmembly
With Start, Stop, E-stop, And Disconnect
20’ Electrical So Cord